Inspections: Timeline and Description

The current turn around time for inspections is 2-3 business days.

INSPECTIONS

Our products are high-quality and could last more than a decade if properly maintained. We recommend a certified inspection annually on all aviation helmets because personal protection equipment (PPE) is a safety issue. During the inspection process, it may be recommended that the helmet received be refurbished. Refurbishments are a separate service that brings the helmet back to “like new” condition.
Unlike helmets designed for other purposes, helicopter and flight helmets should absorb a large amount of the impact during an event. Once the liner has compressed, that location of the liner cannot absorb any more energy. Normal wear and placing the helmet down on its crown have detrimental effects on the liner. The energy absorbing liner is replaced, at minimum, every year during the annual inspection of the helmet. Liner should also be replaced if there are any signs of cracking or pieces missing.
Once we receive a confirmation or PO for work, the service will be completed as stated in the estimate. The helmet will be returned as soon as possible. If there are questions about setting up a maintenance schedule, please contact us and we will happily assist.

During an inspection, the certified technician will:

• Visually Inspect the Underside of the Shell
• Visually Inspect for any Defective Parts
• Use Testing Equipment on all Communication Elements
• Ensure Proper Operation of all Moving Components
• Visually Inspect Visor Lens for Scratches and Optical Clarity
• Visually Inspect all Soft Goods for Non-Hygienic Circumstances and Serviceability
• Write and Send an Estimate of their Recommendations

Last modified: Jun 10, 2019

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Post Comment