• Move the inner lens halfway down.
  • Remove the upper visor assembly screw on the side with the actuator arm and slightly loosen the other three assembly screws.
  • Slide the visor lens up pushing the actuator arm through the gap in between the upper and lower tracks.
  • To replace the lens, reverse the process.
    Note: This can usually be completed without removing the Shock liner, but in some instances, it may be necessary to remove the shock liner to gain access to the visor screw post on reassembly.
Last modified: Jun 07, 2019


Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Post Comment